Our CNC machining facility for customers in Odisha & Chhattisgarh
Turning, milling, wire EDM and conventional machines under one roof, so most parts are made complete without outsourcing.
- CNC turning and turn-mill
- Vertical and horizontal milling
- Wire EDM
Get a quick quote
Share your requirement — we call back with options and price.
Machined parts supplied by Mahanadhi Industrial are produced at the CNC facility of our group brand Synergy Automatics. The shop combines CNC turning centres with bar feeders, turn-mill centres with live tools, vertical milling centres, wire EDM and a range of conventional machines.
Having these processes together means a part can move from bar cutting to turning, milling, drilling and inspection without leaving the shop. For buyers in Raigarh, Jharsuguda and the wider region, we handle the enquiry, drawings and dispatch so you deal with one point of contact.
The mix of CNC and conventional machines matters to buyers. CNC equipment gives repeatable accuracy on batches, while conventional lathes, drilling and grinding keep one-off repairs and simple modifications quick and economical. Wire EDM covers hardened parts and fine profiles that would otherwise need specialist outsourcing.
Where it is used
- Precision turned components
- Milled housings and plates
- Replacement spares for plant machinery
- Jigs and fixtures
- Hardened parts by wire EDM
- Short-run and repeat batches
- Prototype parts
Key benefits
CNC turning and turn-mill
Bar-fed turning centres for repeat batches and turn-mill centres that finish complex parts in one setup.
Vertical and horizontal milling
VMCs for pockets, profiles and multi-face parts, plus horizontal milling for slots and heavier cuts.
Wire EDM
Wire cutting for hardened materials, fine profiles and sharp internal corners that cutters cannot reach.
Measured and checked
Quality checking instruments are used for first-off approval and final inspection before dispatch.
Equipment and what each machine is used for
| Machine | Typical work |
|---|---|
| CNC turning centres with bar feeder | Repeat batches of shafts, pins, bushes and fittings |
| CNC turn-mill centres with live tools | Turned parts with cross holes, flats and slots in one setup |
| Vertical milling centres | Plates, blocks, housings, pockets and 3D profiles |
| Horizontal milling machine | Slots, keyways and heavier side milling |
| EDM wire cutting machine | Hardened parts, dies, fine profiles |
| Single spindle automats and capstan lathe | High-volume small turned parts |
| 4-inch lathes | Conventional turning, one-off repairs |
| Drilling machines, bench grinding, bandsaw | Secondary operations, deburring and bar cutting |
| Quality checking instruments | Dimensional inspection |
How a job moves through the shop
- Drawing review: we check material, tolerances and quantity and raise any questions before quoting.
- Process planning: the part is routed to the machines that suit its shape and batch size.
- First-off approval: the first part is measured against the drawing before the batch runs.
- Production and in-process checks: critical dimensions are checked during the run.
- Final inspection and dispatch: parts are inspected, packed to avoid damage and sent to your site in Chhattisgarh or Odisha.
See CNC turned parts and CNC milling and job work for the parts we typically supply.
Why this matters for plant maintenance teams
Breakdown spares are often needed at short notice and in small quantities. Because turning, milling, drilling and inspection happen in one place, a spare does not wait between subcontractors, and responsibility for the finished part stays with one supplier.
- Reverse engineering: worn samples are measured and drawn before machining.
- Repeat orders: programs and setups are kept, so re-orders run faster and match earlier batches.
- Material range: brass, steels, stainless steel, aluminium, plastics and special alloys.
- One contact: Mahanadhi Industrial handles drawings, approvals and dispatch to Odisha and Chhattisgarh.
Need help choosing?
Send us your application, duty and site conditions. We recommend the right model and quote with delivery to your plant.
Related
Machines on our shop floor












CNC Machining Facilities: questions buyers ask
Straight answers to the questions plant teams ask us most.
Where is the machining facility located?
The machines are at our group brand Synergy Automatics' CNC facility. Mahanadhi Industrial handles enquiries, quotations and dispatch for customers in Chhattisgarh and Odisha.
Can I visit or audit the facility?
Facility visits can be arranged on request for vendor approval. Contact us with your preferred dates and the scope of the audit.
What is the largest part you can machine?
The vertical milling centre handles bed sizes up to about 1 metre. For larger or heavier parts, send the drawing and we will confirm whether it can be made in-house or needs a different route.
Do you take one-off repair jobs?
Yes. Conventional lathes, drilling and grinding are well suited to one-off repairs and modifications, alongside CNC machines for batch work.
Can you share inspection reports?
Dimensional inspection results for critical features can be provided with the shipment when requested at the enquiry stage.
You may also need

CNC Turned Parts
Precision turned components made to your drawing or sample, in batch sizes from prototypes to regular production runs.
View details
CNC Milling and Job Work
Milled components and short-run job work to your drawing, from single prototypes to repeat batches.
View details
CNC Machining Services
Turned and milled parts, spares and job work made to your drawing or sample and delivered to your site.
View detailsHave a part that needs machining?
Send your drawing or sample and we will tell you which process suits it, with a price and lead time.