Atomization refers to the process of breaking up liquids into droplets. Fine Air Atomizing nozzle droplet sizes are measured in microns. Common home atomizers you may be familiar with include shower heads, perfume sprays, garden hoses, and deodorant or hair sprays.

In direct pressure nozzles, the fluid is broken up (atomized) into droplets by either impact on a surface or by the swrilling motion caused by passing the liquid through a shaped orifice. In both cases the energy required for the atomization comes from the potential energy of the fluid itself. Essentially the energy available for atomization is a function of fluid pressure.

In air atomizing nozzles pressurized air (or other gas) is used to impact upon the fluid being sprayed. The impact of the gas causes the fluid to break apart into a fine spray. This means that the energy required for atomization is no longer dependent on fluid pressure because of which very fine sprays can be produced at low fluid pressures. The allows for very fine, low volume sprays to be delivered

Air Atomizing spray Nozzles have many unique spray properties and specification which helps the designers to use in wide range of spraying applications.

Air Atomizing nozzles is a combination of water atomizer nozzle and air atomizer nozzle

1. Pressure Atomization

2. Air Spray Atomization

3. Centrifugal Atomization

4. Electrostatic Atomization

5. Twin Fluid Atomization

• Surface Tension
• Viscosity
• Ensity
• Pressure​

• Atomization of viscous liquids
• Chemical coating
• Cooling
• Misting
• Fogging
• Humidification of air
• Humidification of goods
• Lubrication
• Chemical Spraying
• Chemical Injection
• Paint Spraying
• Gas cooling
• Lubricating
• Humidity control

Spray atomization involves creating a condition of high relative velocity between the liquid to be atomized and the surrounding air or gas. Typical atomizer nozzle types include:

• Electrostatic
• Impinging jet
• Windmill
• Whistle
• Ultrasonic

Twin fluid. Twin-fluid atomizers include all nozzle types, and may involve one of the processes below:

Internal Mix – The gas and liquid are mixed within the body of the nozzle. It forms the finest atomization, which exits through one orifice. There is a direct relationship between the liquid and the air; any change in the air pressure affects the liquid flow. The full cone, hollow cone and flat spray patterns can be achieved using the internal mix method.

External Mix – The gas and liquid are mixed externally; this offers better control since there is no connection between the gas and liquid inlet lines. Viscous liquids can be sprayed using External mixtures. however, the atomization is not as fine as in the internal mix. Both full cone and flat spray patterns are achievable.

Five types of Air Atomizing nozzles are designed and available with us

• External Mixture Flat Fan
• Internal Mixture Siphon Flat Fan
• Internal Mixture wide angle
• Internal Mixture Jet round
• External Mixture Narrow round
• Paint Spray Atomizing Nozzle

Do let us know in case of any custom nozzle requirement.

Further details about the spray nozzles are available online at www.synergyspray.com

tag: air atomizing nozzle India, atomizing nozzle chemical injection, water atomizing nozzle india, water atomizing nozzle design, spray nozzle, water atomizer, air atomizing nozzle droplet size, industrial spray nozzles, water atomizer fogger ultrasonic adjustable droplet size