Tork 2/2 Way S1010 General Purpose Solenoid Valves
Availability:
In stock
Product Specifications:
| Brand | Tork |
| Frequency | 50 Hz,other frequencies on request; (60 Hz) |
| Connector Specification | ISO 4400 / EN 175301-803,Form A,Spade plug (Cable dia. 6-8 mm) |
| Electrical Safety | IEC 335 |
| Standard Voltages | 110V,230V,For AC 12V,For DC 12V,110 V,48V,24V |
| Voltage Tolerances | For AC -15%; +10%,For DC -5%; +10% |
| Electric Plug Connection | DIN 46340 3-poles connectors (DIN 43650) |
| Ambient Temperature | From -10 deg C +60 deg C |
| Continuous Duty | ED %100 |
| Coil Insulation Class | H (180 deg C) |
| Coil Impregnation | Polyester Fiber Glass |
| Coil Encapsulation Material | Fiber Glass Reinforced |
| Protection Degree | IP 65 (EN 60529) with coil duly fitted with the plug connector |
Description
Product Description:
Features:
- Suitable for non-aggressive liquids (water, light oil (2E) et), gaseous fluids (air, inert gases etc.)
- Not suitable for use with dangerous fluids listed in Group 1
- Minimum operating pressure differential 0,5 bar
- High reliability, quality and performance, long life, corrosion resistance
- Wide pressure ratings, range of flow rate and orifice options
- Ideal for the automatic control of media in a wide range of applications.
- TORK solenoid valves satisfy relevant 97/23/EC, Pressure Equipment Directive (PED) and 2006/95/EEC Low Voltage Directive (LVD).
- Coils interchangeable
- Flow factor Kv of each valve is indicated, so that the flow Q can be calculated as a function of pressure
- Solenoid valves must be used with filtered fluids.
- Solenoid valve can be mounted in any position without affecting operation, vertical with coil upwards preferred.
- Standard pipe connection is G (BSP) (ISO 228-1) and on request, other pipe connections are available (NPT (ANSI 1.20.3)).